Re: FRTShaping config

From: David Nie (david.nie@xxxxxxxxxxxxxxxxxxxxx)
Date: Sun Aug 12 2001 - 23:07:22 GMT-3

Next message: Jason Sinclair: "RE: Net Gun programme feedback"
Previous message: Jim Brown: "RE: Ospf NBMA strange experience"
Maybe in reply to: Dan: "FRTShaping config"
Next in thread: Lachlan Kidd: "RE: RE: FRTShaping config"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I think that Be should be 2000, not 8000.

----- Original Message -----
From: "Dan" <dp595@optonline.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, August 12, 2001 6:44 AM
Subject: FRTShaping config

> Can someone take a look at my config and let me know if it is correct?
>
> I'm trying to accomplish the following:
>
> CIR is 48k burstable to 64k. BECN will be sent by provider.
> I want to lower the speed to 16k when receiving BECN and I'm using Tc of
> 125ms.
>
>
> interface Serial0
> ip address 101.1.6.71 255.255.255.224
> encapsulation frame-relay
> frame-relay traffic-shaping
> frame-relay class shape
> frame-relay map ip 101.1.6.74 102 broadcast
> no frame-relay inverse-arp
>
>
> map-class frame-relay shape
> frame-relay cir 48000
> frame-relay bc 6000
> frame-relay be 8000
> frame-relay mincir 16000
> frame-relay adaptive-shaping becn
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

Next message: Jason Sinclair: "RE: Net Gun programme feedback"
Previous message: Jim Brown: "RE: Ospf NBMA strange experience"
Maybe in reply to: Dan: "FRTShaping config"
Next in thread: Lachlan Kidd: "RE: RE: FRTShaping config"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3