From: Beamish, Richard (Richard.Beamish@xxxxxxxxxxxxxxxx)
Date: Sat Aug 11 2001 - 22:09:48 GMT-3
Any familar with seting up a console connection for an IGX 8400 series. I
have connected a straight-thru as recommend in the manuals and I can see the
boot process. After the boot process the screen displays garbage. I have
tried several setting (ie. flow control, baud rate etc). Below is a dump of
the problem I am having.
68000 clock test passed.
TDM memory test passed.
Muxbus Routing Table memory test passed.
TX FIFO Flag test passed.
RX FIFO Flag Test passed.
Dual-port SRAM memory test passed.
1024K of BRAM is available.
BRAM test passed.
Dynamic RAM test from Hex Address 30000000 to Hex Address 31FFFFFF passed.
Tick Interrupt Test ... passed.
Clearing Dynamic RAM
area.......................................................
............................................................................
....
............................................................................
....
.........................................
Clearing Dual-Port RAM area.
NPM Boot power up diagnostics complete.
****************************************************************************
****
BcedcDcemr"mr%gwkm1q!a
o+m+7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!a
i+FJ-F^
F^+q
Z
N#?gff"b#d...'dff"b#5///'9q
ikqOE+yOEkyOEkq
k)FHioHLL
^saLe$&"&?D&D"F?c%?b#eDcDf?$G???
cedcedc...?b#e"r
Any ideas?
Thanks in advance.
Dick Beamish
Getronics Government Solutions
richard.beamish@getronicsgov.com
Work: 703.516.5553
Voice: 703.827.3132
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3