From: Patrick (pjm@xxxxxxxxxxxxxxxxx)
Date: Sat Aug 11 2001 - 21:44:24 GMT-3
Kyle,
Are you running 12.0.7T? If so there is a cosmetic bug which will give you
SPID's invalid even when they are valid.
The switch type also affects the SPID's, if the switch type is wrong I think
you will not even get Layer 1 active. ( Correct me if I'm wrong on that!)
Here are a couple of displays from show isdn status. The first is with the
correct SPID's and the second is with incorrect SPID's.
Hope that helps
Patrick
Global ISDN Switchtype = basic-dms100
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 68, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 69, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 68, ces = 1, state = 5(init)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 70, tid = 1
TEI 69, ces = 2, state = 5(init)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 71, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
Global ISDN Switchtype = basic-dms100
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 71, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 71, ces = 1, state = 6(not initialized)
spid1 configured, no LDN, spid1 sent, spid1 NOT valid
TEI Not Assigned, ces = 2, state = 1(terminal down)
spid2 configured, no LDN, spid2 NOT sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
----- Original Message -----
From: "kyle prevey" <preveyk@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, August 11, 2001 11:58 PM
Subject: SPIDs question
> If the SPIDs on the BRI0 interfaces are correct and I do a show Isdn
status,
> I shouldn't get Layer 1 Active, Layer 2 Spids Not Valid even if the other
> interface commands are wrong? If not, what commands affect the Spids and
> invalidate them?
>
> Kyle
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:49 GMT-3