From: ElleJf\(Yahoo\) (ellejf@xxxxxxxxx)
Date: Fri Aug 10 2001 - 13:32:39 GMT-3
In RFC2166, it says "RFC 1795 defines the use of two unidirectional TCP/IP sess
ions between any pair of DLSw peers using read port number 2065 and write port
number 2067."
"6.2.1.1 TCP Port Numbers
DLSws implementing these enhancements will use a TCP destination port of 2067 (
as opposed to RFC 1795 which uses 2065) for single session TCP conections."
But as we do DLSw+, always use a destination port 2065 for TCP. Never saw rout
er use port 2067. So in DLSw+, only destination port 2065 will be used for TCP
?
When Cisco router interoperate with non-Cisco, RFC2166 compliant router, will C
isco behave as RFC2166 specified? That is, use 2067 as suggested?
|:"f
|g-J+~7&!"\"fv7,1+a6Zy
_rj(}J&
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:48 GMT-3