From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Thu Aug 09 2001 - 00:23:05 GMT-3
Group,
Does IGRP advertise loopbacks or ethernet segments as network summaries
only? With token ring it seems to advertise the subnet just fine. I have the
following configuration:
interface Loopback0
ip address 15.15.8.8 255.255.255.0
!
interface Ethernet0
ip address 172.27.1.1 255.255.255.0
no keepalive
!
interface Ethernet1
ip address 172.27.2.1 255.255.255.0
no keepalive
!
interface Serial0
ip address 10.1.10.8 255.255.255.0
!
interface TokenRing0
ip address 10.2.1.1 255.255.255.0
ring-speed 16
!
interface TokenRing1
ip address 10.3.1.1 255.255.255.0
ring-speed 16
!
router igrp 1
passive-interface Ethernet0
passive-interface Ethernet1
passive-interface Loopback0
passive-interface TokenRing0
passive-interface TokenRing1
network 10.0.0.0
network 15.0.0.0
network 172.27.0.0
As you can see, IGRP is advertising the TR interfaces as subnets, but only
classful network summaries for the ethernet and loopbacks. The remote router
is not receiving the route for the loopback address as well.
06:14:50: IGRP: sending update to 255.255.255.255 via Serial0 (10.1.10.8)
06:14:50: subnet 10.3.1.0, metric=688
06:14:50: subnet 10.2.1.0, metric=688
06:14:50: network 172.27.0.0, metric=1100
06:14:50: network 15.0.0.0, metric=501
06:14:50: IGRP: Update contains 2 interior, 2 system, and 0 exterior routes.
06:14:50: IGRP: Total routes in update: 406:17:50: IGRP: received update
from 10.1.10.6 on Serial0
Am I missing something obvious?
Please help.
Daniel C. Young
Sr. Network Engineer
(909) 221-1928 Direct
dan.young@sbc.com
SBC Internet Data Center
2681 Kelvin Ave.
Irvine, CA 92614
(949) 221-1900 Main
(949) 221-1978 Fax
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:47 GMT-3