From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Sun Aug 05 2001 - 01:47:26 GMT-3
Jason: The config is correct for DLSW with one MINOR exception. You
need to add the ring-speed <4|16> to the token ring interfaces to have
them insert. With RSRB the ring groups need to be the same and the peer
statement is different (source-bridge remote-peer 100 tcp 2.2.2.2, for
example).
Cheers, Fred.
Jason Sinclair wrote:
>
> Hi,
>
> With DLSW and RSRB the whole purpose is to transport LLC frames? However,
> when you lab this up with DLSW and no hosts connected to your media, you
> will have a connected DSLW peer state, HOWEVER will not have a DLSW circuit
> establisehd. With RSRB the peer state will be closed? Is this correct or
> have I done something wrong? Partial config below:
>
> Router1
> Source-bridge ring-group 100
> Dlsw local-peer peer-id 1.1.1.1
> Dlsw remote-peer 0 tcp 2.2.2.2
> !
> Int to0
> Ip address 1.1.1.1 255.255.255.0
> Source-bridge 16 1 100
> Source bridge spanning
>
> Router1
> Source-bridge ring-group 200
> Dlsw local-peer peer-id 2.2.2.2
> Dlsw remote-peer 0 tcp 1.1.1.1
> !
> Int to0
> Ip address 2.2.2.2 255.255.255.0
> Source-bridge 17 1 200
> Source bridge spanning
>
> Regards,
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be reproduced,
> adapted or transmitted without the prior written consent of the copyright own
er.
>
> Emails may be interfered with, may contain computer viruses or other defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:45 GMT-3