From: dwsmall@xxxxxxxxxx
Date: Sun Aug 05 2001 - 17:43:00 GMT-3
What is it you want to know? It is used to perform static PAT (port address
translation) so that you can send traffic for one service. NATted to given
IP. to one internal host, and traffic for another service to a differant
internal host.
Derek Small
President
Fatkid.com, Inc.
dwsmall@fatkid.com
----- Original Message -----
From: "Brian Hescock" <bhescock@cisco.com>
To: "SALMON, MARK (SBMS)" <MARK.SALMON@cingular.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, August 05, 2001 8:39 AM
Subject: Re: Fatkid and NAT
> ip nat inside source static tcp
>
> "SALMON, MARK (SBMS)" wrote:
>
> > Lab 365 on Fatkid.com. In the solution, there is a config command ip
nat
> > static tcp .....
> >
> > I have been looking for that command on the CD and cannot find it.
> >
> > Mark Salmon
> > Sr. WAN Engineer Great Lakes Region
> > Cingular Wireless
> > 2000 Ameritech Center Drive 3F07B
> > Hoffman Estates IL 60195
> > Voice: (847)765-3999
> > Pager: (847)992-0458
> > Email: mark.salmon@cingular.com
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:45 GMT-3