From: Diehm, Brian (Brian.Diehm@xxxxxxxxxx)
Date: Fri Aug 03 2001 - 18:43:07 GMT-3
Is is possible to do this with out the use of a username?
-----Original Message-----
From: Schmitt, Greg [mailto:gschmitt@thrupoint.net]
Sent: Friday, August 03, 2001 2:55 PM
To: 'Karelis, Pete (2507)'; Diehm, Brian; ccielab@groupstudy.com
Subject: RE: different level passwords
Brian,
You can configure individual users and passwords with individual privilege
levels with the global command:
username test privilege 15 password 0 test
Use the commands Pete has shown below to set the various levels (other than
1 and 15), and substitute the appropriate level
for the user in place of the 15 used above.
Cheers,
Greg Schmitt
Internetwork Solutions Engineer
ThruPoint, Inc.
Voice: 410-349-9772
Cell: 443-822-5183
Pager: 888-773-0423 or pager.gschmitt@thrupoint.net
e-mail: GSchmitt@thrupoint.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Karelis, Pete (2507)
Sent: Friday, August 03, 2001 11:48 AM
To: 'Diehm, Brian'; 'ccielab@groupstudy.com'
Subject: RE: different level passwords
When the user goes to enter enable mode they need to type in "enable 13"
instead of plain "enable" that way it uses the privilege-level of 13.
Remember though, that you need to specify which commands are level 13
commands, because in the IOS all commands are either level 1 or level 15
commands. There is no in between unless you manually change the privilege
level of each command using the:
privilege exec level [Level#] [Command line]
privilege configure level [Level#] [Command line]
privilege interface level [Level#] [Command line]
You need to change the privilege level of all commands that you want the
level 13 user to use.
-Pete
-----Original Message-----
From: Diehm, Brian [mailto:Brian.Diehm@compaq.com]
Sent: Friday, August 03, 2001 11:31 AM
To: 'ccielab@groupstudy.com'
Subject: different level passwords
I am trying to set up this router so that I can have different passwords for
different users. I don't want to have it where they need to type in a
username and a password. The router refuses to recognize any password other
then the level 15 one. I suspect that I am missing a command but I don't
see any on the documentation CD. Anybody have any ideas?
Thanks,
Brian D
!
version 11.1
service udp-small-servers
service tcp-small-servers
!
hostname r3
!
enable secret level 13 5 $1$oKSI$FP3aQTPZPjxOREhfXgkJN/
enable secret level 14 5 $1$Pfaq$Dk7FLSVPs6Yjvm4n9Nk2t1
enable secret 5 $1$6.5.$jSZo5uJOWTnGHyr7QOtV0.
!
ip subnet-zero
no ip domain-lookup
!
interface Ethernet0
ip address 207.122.2.2 255.255.255.0
!
interface Ethernet1
no ip address
shutdown
!
interface Serial0
ip address 207.122.1.2 255.255.255.0
clockrate 56000
!
interface Serial1
no ip address
shutdown
!
ip classless
logging buffered
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
privilege level 15
no login
!
end
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:44 GMT-3