From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Thu Aug 02 2001 - 19:02:48 GMT-3
if you deb eigrp and you make up an AS # you will get a debug message that
you are using the wrong AS and it will let you know what the correct AS you
need to match to is. Try it, it really works.
HTH
Steve
----- Original Message -----
From: Bob Chahal <bob.chahal@ntlworld.com>
To: Chuck Church <cchurch@MAGNACOM.com>; <ccielab@groupstudy.com>
Sent: Thursday, August 02, 2001 5:41 PM
Subject: Re: If you didn't know the IPX EIGRP AS no.
> I check the debugs for hello again but sniffer will do the trick as you
say
> only problem no sniffer in the LAB ;-)
>
>
> ----- Original Message -----
> From: "Chuck Church" <cchurch@MAGNACOM.com>
> To: "'Bob Chahal'" <bob.chahal@ntlworld.com>; <ccielab@groupstudy.com>
> Sent: Thursday, August 02, 2001 10:37 PM
> Subject: RE: If you didn't know the IPX EIGRP AS no.
>
>
> > Since both neighbors-to-be need to be in the same AS, I'd expect the AS
> > number to be buried in the hellos somewhere. A sniffer trace would
> probably
> > show it.
> >
> > Chuck
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Bob Chahal
> > Sent: Thursday, August 02, 2001 4:29 PM
> > To: ccielab@groupstudy.com
> > Subject: If you didn't know the IPX EIGRP AS no.
> >
> >
> > If you didn't know the IPX EIGRP AS no. what debug tool or technique
could
> > you use to to find it out. I've tried configuring an arbitary as no. and
> > included the interface network number in the routing process. I've run
> debug
> > ipx eigrp and debug ipx pac but can't get an indication of what the AS
> > number of the other router is. Both routers share a common ipx network
> > number and encapsulation.
> >
> > TIA
> >
> > Bob
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:43 GMT-3