From: Bob Chahal (bob.chahal@xxxxxxxxxxxx)
Date: Thu Aug 02 2001 - 18:41:38 GMT-3
I check the debugs for hello again but sniffer will do the trick as you say
only problem no sniffer in the LAB ;-)
----- Original Message -----
From: "Chuck Church" <cchurch@MAGNACOM.com>
To: "'Bob Chahal'" <bob.chahal@ntlworld.com>; <ccielab@groupstudy.com>
Sent: Thursday, August 02, 2001 10:37 PM
Subject: RE: If you didn't know the IPX EIGRP AS no.
> Since both neighbors-to-be need to be in the same AS, I'd expect the AS
> number to be buried in the hellos somewhere. A sniffer trace would
probably
> show it.
>
> Chuck
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Bob Chahal
> Sent: Thursday, August 02, 2001 4:29 PM
> To: ccielab@groupstudy.com
> Subject: If you didn't know the IPX EIGRP AS no.
>
>
> If you didn't know the IPX EIGRP AS no. what debug tool or technique could
> you use to to find it out. I've tried configuring an arbitary as no. and
> included the interface network number in the routing process. I've run
debug
> ipx eigrp and debug ipx pac but can't get an indication of what the AS
> number of the other router is. Both routers share a common ipx network
> number and encapsulation.
>
> TIA
>
> Bob
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:43 GMT-3