From: Brent D. Stewart (brent@xxxxxxxxxxxxxxxxxxxxx)
Date: Thu Aug 02 2001 - 16:45:49 GMT-3
Sorry, but I have to ask:
1) Can you ping 10.1.1.1 from the router?
2) Does the file exist in the right directory?
If you already have a config then you don't have to worry about the
interface assigning itself an address. Check to make sure that your config
register isn't set wrong - should probably be 0x2102, if it is (for
instance) 0x101 then that would explain why it comes up in boot (is
it?-wasn't sure from your message).
I can't think of any reason that, in this regard, a 2600 would differ from
any other IOS router.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Fred
Sent: Thursday, August 02, 2001 3:06 PM
To:
Subject: boot from tftp
Anyone experience booting IOS from tftp server for 2600 routers? I put in
"boot system IOS.bin 10.1.1.1" and then reboot, after it loads up bootstrap
then it can't find the image and boot up using what ever image that is
already
on the flash. It seen to me that the ethernet interface has never comes up
after the bootstrap loaded up. Any idea?
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:43 GMT-3