From: Brian (signal@xxxxxxxxxx)
Date: Sun Jul 01 2001 - 15:31:49 GMT-3
You need to get that info from the CSU.
Usually, CSU's come defaulted at: 24 x 64k channels, ESF,
B8ZS, clocking from LINE (or NET, which basically just means
the clocking source is the T1 line itself).
What type of CSU is it?
Brian
On Sun, 1 Jul 2001, Jeongwoo Park wrote:
> I have 2500 router remotely that is connected directly to CSU. This CSU
> terminate point to point T1 line.
> I am not really sure which clocking source this CSU is configured. So I am
> looking for a way to tell which clock source (line, internal) from 2500
> router by issuing show command line because I can telnet to this router.
>
> Thanks
>
> JP
> **Please read:http://www.groupstudy.com/list/posting.html
-----------------------------------------------
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny,CCDP,CCNP+VAS Scarlett Parria
signal@netjam.net scarlett@netjam.net
318-213-4709 318-213-4701
Netjam, LLC http://www.netjam.net
333 Texas St. VISA/MC/AMEX/COD
Suite 1401 30 day warranty
Shreveport, LA 71101 Cisco Channel Partner
toll free: 866-2NETJAM
phone: 318-212-0245
fax: 318-212-0246
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:28 GMT-3