From: Ramesh Ramasamy (ramesh_ramasamy@xxxxxxxxxxx)
Date: Sun Jul 01 2001 - 12:39:59 GMT-3
Khalid,
I have a similar experience - 12.1.5 T8 - with 3DES -HSRP/tracking/etc.,
I noticed that I crash the ios when i forget to put the same standby group #
and try to add a standby ... command !!! on the 2620.
Luckily, my setup was for pre-production testing !! I know this now - so
when it is being brought up ! I will ensure that i dont do the simple
mistake!
Anyone aware of any specific bug id?
Thanks,
Ramesh.
>From: Khalid Nafie <knafie@ncr.com.kw>
>Reply-To: Khalid Nafie <knafie@ncr.com.kw>
>To: "Ccielab (E-mail)" <ccielab@groupstudy.com>
>Subject: HSRP- I hate bugs
>Date: Sun, 1 Jul 2001 01:28:20 +0300
>
>Hi guys,
> i configured HSRP with authentication the funny thing is that after
>I configured one side with auth it worked although the other side is not
>conf for auth yet, then I put different password on the other side, and
>thanks god there was a message stating that bad authentication, but every
>thing was working fine and they know about each other, further more I
>shutdown the tracked interface at the active peer so its priority decreased
>and the other peer took over, I don't know what kind of authentication is
>this?
>hopefully someone has similar experience
>
>================================================
>Yours,
>Khaled Nafie
>Network Engineer
>Customer Services
>MCSE,CCDP,CCNP VOICE ACCESS
>NCR Corporation, Kuwait
>Mob.: +965-9872046
>Tel : +965- 2412201, 2412203
>Fax : +965-2413075
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:28 GMT-3