From: Jeff K. (jeffbk@xxxxxxxxxxxxx)
Date: Sat Jun 16 2001 - 21:07:41 GMT-3
I had trouble getting the DLSW stuff down first as well... I finally read
the information on this page off CCO and it really helped a lot. There are
a lot of sections to this, but the first three are really a good start.
There is also a queuing section that is good. There are some sample configs
in there that helped me out. The second section talks a little about the
canonical / non-canonical situations.
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/prodlit/toc_rg.htm
HTH,
-Jeff
----- Original Message -----
From: "Luke" <luke.mendoza@home.com>
To: "Ccie (E-mail)" <ccielab@groupstudy.com>
Sent: Saturday, June 16, 2001 6:31 PM
Subject: SR/TLB and DLSW+
> Hello,
>
> Does anyone have a sample working config of SR/TLB in a DLSW+ scenario?
> Also when should I watch out for the bit swapping between canonical and
> non-canonical macs?
>
> I don't really have a router with an ethernet and token ring so I am
trying
> to simulate a 2513 by using the virtual-token ring interface.
>
>
> Thanks,
>
> Luke
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:25 GMT-3