From: kym blair (kymblair@xxxxxxxxxxx)
Date: Sat Jun 16 2001 - 00:54:24 GMT-3
Khalid,
I found an instance where the secondary address doesn't work with ethernet
either. If you have a secondary in the same subnet, the primary must be the
lower of the two addresses, then they both work.
Example:
DOESN'T WORK:
ip address 132.173.4.200 255.255.255.0
ip address 132.173.4.1 255.255.255.0 secondary
DOES WORK:
ip address 132.173.4.1 255.255.255.0
ip address 132.173.4.200 255.255.255.0 secondary
Why would we want to do that, you might ask ... because a bunch of
workstations were pointing to one gateway (.1) and a bunch of new
workstations were pointing to another gateway (.200); we merged the gateways
and neither user group wanted to change the default gateway on all their
workstations.
Kym
>From: Khalid Nafie <knafie@ncr.com.kw>
>Reply-To: Khalid Nafie <knafie@ncr.com.kw>
>To: "Ccielab (E-mail)" <ccielab@groupstudy.com>
>Subject: eigrp with secondary ip
>Date: Sat, 16 Jun 2001 03:29:59 +0300
>
>hi all,
> Is there any restriction on eigrp secon ip add on serial interface,
>its working fine with ethernet and the route propagate but it dos't work
>with point-to-point serial interface, do i miss somthing?
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:24 GMT-3