From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Thu Jun 14 2001 - 20:28:00 GMT-3
Padhu,
I think you need to add 'async default routing' to the async
interfaces.
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Padhu (LFG)
Sent: Thursday, June 14, 2001 6:46 PM
To: 'ccielab@groupstudy.com'
Subject: Routing protocols over Async
This has worked before ..not sure why its broken now...
Simple AUX - AUX between 2 routers ...I can ping from 1 async to remote
async interface fine.
Even telnet both ways via async works fine...But i cannot run any routig
protocol over it...
Tried OSPF (with various net types, EIGRP also) ..finally rip v1 ...Don't
see the nets
coming in ...Debugs are normall sending updates via asycn...
Can someone tell me whats wrong with this picture ?
Cheers,Padhu
BB3:
interface Async4
ip address 192.168.100.3 255.255.255.0
encapsulation ppp
ip ospf network broadcast
async dynamic routing
async mode dedicated
line aux 0
modem InOut
transport input all
rxspeed 38400
txspeed 38400
flowcontrol hardware
router rip
network 192.168.100.0
R4:
interface Loopback10
ip address 10.1.1.1 255.255.255.0
interface Async1
ip address 192.168.100.4 255.255.255.0
encapsulation ppp
ip ospf network broadcast
async dynamic routing
async mode dedicated
router rip
network 10.0.0.0
network 192.168.100.0
line aux 0
exec-timeout 0 0
password cisco
modem InOut
transport input all
speed 38400
flowcontrol hardware
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:24 GMT-3