Re: username callback dialstring

From: Ilya Mazhara (willy@xxxxxxxxxxxxxxxx)
Date: Thu Jun 14 2001 - 08:43:43 GMT-3

• Next message: OWEN, DAN (SWBT): "RE: ECP1-Mentor Technologies Concern"
• Previous message: Paul Borghese: "Re: username callback dialstring"
• Maybe in reply to: Padhu (LFG): "username callback dialstring"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
We talked about solution without dial-string on the interfase but with
command:
username gomer pass stupid callback-dialstring 911911...

Paul Borghese wrote:
>
> For dialer- profiles you need to use a Username/Password combination so the
> router can recognize which dialer profile to attach to the incoming call.
> In the later versions of the IOS, the software has the capability to use
> Caller ID and match against the dialer-string.
>
> So make sure you have ppp authentication enabled and the correct passwords
> set. If router A is calling Router B, you must have a line on router B that
> says:
>
> username A password .....
>
> Likewise, router A must have a Username B ....
>
> Here is an example configuration of it working:
>
> username r7 password 0 cisco
> !
> interface BRI0
> no ip address
> no ip directed-broadcast
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 2010 2010
> !
> interface Dialer0
> description ISDN to Router77
> ip address 161.64.27.1 255.255.255.128
> no ip directed-broadcast
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 45
> dialer string 2012
> dialer-group 1
> ppp authentication chap
> ppp chap password 7 14141B180F0B
> !
> dialer-list 1 protocol ip permit
>
> ----- Original Message -----
> From: "Ilya Mazhara" <willy@aspect.vyatka.ru>
> To: "Padhu (LFG)" <padhu@steinroe.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Thursday, June 14, 2001 1:49 AM
> Subject: Re: username callback dialstring
>
> > i got same result
> >
> > "Padhu (LFG)" wrote:
> > >
> > > If anyone has tried username callback dialstring for callbacks and got
> it
> > > working , pls let me know. I can never get it to work.
> > >
> > > Cheers,Padhu
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: OWEN, DAN (SWBT): "RE: ECP1-Mentor Technologies Concern"
• Previous message: Paul Borghese: "Re: username callback dialstring"
• Maybe in reply to: Padhu (LFG): "username callback dialstring"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:23 GMT-3