From: Brian (signal@xxxxxxxxxx)
Date: Wed Jun 13 2001 - 21:42:45 GMT-3
On Wed, 13 Jun 2001, Eric Wang wrote:
> Hi,
>
> I have no experience on 3920. I read the configuration document on
> cisco web site. I found that if I want to create VLAN, I have to
> create TrBRF first, then TrCRF, than VLAN. The ports on the same TrCRF
> belong to same ring. The different rings connect to its parent TrBRF.
> Will the rings in same TrBRF be bridged by default? If not, does 3920
> support Token Ring trunk to a router? If it does, what's the
> requirement and how ot do it?
yes, thats what a bridge does, is "Bridge". The TrBRF can be set for
either SRB or SRT, you configure that when you configure the TrBRF.
Its sounds to me from the above that you have a pretty good understanding
from what you read on how to setup the 3920. I would recommend you spend
an hour or so playing around on a remote one, if you do not have one of
your own, its very simple to get use to, and to just setup vlans, TrCRF
and TrBRF, is very basic and easy, just not something you want to try and
figure out the day of the exam.
Brian
>
> Thanks
> **Please read:http://www.groupstudy.com/list/posting.html
-----------------------------------------------
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny,CCDP,CCNP+VAS Scarlett Parria
signal@netjam.net scarlett@netjam.net
318-213-4709 318-213-4701
Netjam, LLC http://www.netjam.net
333 Texas St. VISA/MC/AMEX/COD
Suite 1401 30 day warranty
Shreveport, LA 71101 Cisco Channel Partner
toll free: 866-2NETJAM
phone: 318-212-0245
fax: 318-212-0246
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:23 GMT-3