From: Dotun Oni (dot_oni@xxxxxxxxxxx)
Date: Tue Jun 12 2001 - 23:57:54 GMT-3
I thought the 9.@ syntax was only for dial plan configuration on the Call
manager.
Are you sure it also works on the dial-peer config. on the router?
>From: "David C Prall" <dcp@dcptech.com>
>Reply-To: "David C Prall" <dcp@dcptech.com>
>To: "CCIE Lab groupstudy.com" <ccielab@groupstudy.com>
>Subject: Re: VOIP destination-pattern
>Date: Tue, 12 Jun 2001 20:10:37 -0400
>
>9@
>9.@ adds a little safety
>9T will wait a given amount of time for all digits to be dialed
>
>David C Prall dcp@dcptech.com http://dcp.dcptech.com
>----- Original Message -----
>From: "Dotun Oni" <dot_oni@hotmail.com>
>To: <ccielab@groupstudy.com>
>Sent: Tuesday, June 12, 2001 4:52 PM
>Subject: VOIP destination-pattern
>
>
> > What is the best way to include the following destination-patterns in a
> > dial-peer statement using pattern matching.
> >
> > 91800.......
> > 91877.......
> > 91888.......
> > 9411
> > 90
> > 91.......
> >
> >
> >
> > I know I can use
> >
> > dial-peer 1 pots
> > destination-pattern 91800.......
> > port 1/1/0
> >
> > dial-peer 1 pots
> > destination-pattern 91877.......
> > port 1/1/0
> >
> > !
> > !
> > !
> > !
> >
> > etc
> >
> > I am just wondering if there is a way to use one statement to accomplish
> > this instead of listing them separately.
> >
> >
> > Thank
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:23 GMT-3