From: Carolyn Camarda (ccamarda@xxxxxxxxxxxxx)
Date: Tue Jun 12 2001 - 00:20:34 GMT-3
I'm having a mental block with some IGRP configuration, I would appreciate a
little nudge. I have my router e0 interface set up with the IP address of
192.168.33.1/19. I have an IGRP network statement of 192.168.33.0. With
this I do not get IGRP to start up on the E0 interface. I tried the network
statement of 192.168.32.0 thinking that it may be wanting the VLSM network
address. None the less I can not get IGRP to fire up.
If I use a class a (10.) or class b (172.16.) address with the /19 mask, I
don't have a problem. When I change the 192 IP address on e0 to a longer
mask, such as /30 it works fine. My code version is 12.0.5T. I have ip
classless defined on the 2500 router
Is there something with regards to IGRP when the mask can't be shorter than
the classful boundary to which the address belongs. Or what am I doing
wrong?
Any help would be appreciated.
Carolyn
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:22 GMT-3