From: Santarsiero, Bill (BSantarsiero@xxxxxxxxxxxxxxxxx)
Date: Mon Jun 11 2001 - 13:24:16 GMT-3
Haven't read about this in a while, but I believe the condition is based
upon the router acually getting a default route. The router will only
originate a default route into OSPF if it receives a route advertisement.
So the route-map matches on that advertisement. Correct me if I'm wrong.
HTH,
Bill
-----Original Message-----
From: Mike Gutknecht
To: CCIELAB (E-mail)
Sent: 6/11/01 12:10 PM
Subject: OSPF- Default info originate command w/ route-map
Does anyone understand how the "route-map" keyword could be used on
OSPF's
default-information originate command?
e.g
router ospf 10
netw .... area ....
default-information originate route-map test
The command summary says that the default will be originated if the
conditions of the route-map are met. But what, exactly are we testing.
If
there are match parameters in the route map, what do they have to match?
Mike Gutknecht
Systems Engineer
Planetary Networks
503.534.3668 - office
503.704.8365 - cell
mike@justcisco.com
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:22 GMT-3