From: Khalid Nafie (knafie@xxxxxxxxxx)
Date: Sat Jun 09 2001 - 12:54:15 GMT-3
Ya guys u r right,
but as per cicso said for DDR there is 2 solutions :
1st to use KEEpALIVE=0 & TIMEOUT
OR 2nd DYNAMIC keyword & [ no-llc or inactive].
but the solutions is mixing both ways!!!!
================================================
Yours,
Khaled Nafie
Network Engineer
Customer Services
MCSE,CCDP,CCNP VOICE ACCESS
NCR Corporation, Kuwait
Mob.: +965-9872046
Tel : +965- 2412201, 2412203
Fax : +965-2413075
> ----------
> From: Nodir Nazarov[SMTP:nodir@datatone.com]
> Sent: Saturday, June 09, 2001 4:48 PM
> To: Roman Rodichev
> Cc: knafie@ncr.com.kw; ccielab@groupstudy.com
> Subject: Re: FatKid Advanced DLSW
>
>
>
> On Fri, 8 Jun 2001, Roman Rodichev wrote:
>
> > Khalid, the "timeout 90" option (along with "keepalive 0") is a result
> of
> > "dynamic" option. It has nothing to do with the task. These 3 options
> help
> > DDR (along with "no-llc" and "inactivity"). Timeout 90 basically says
> > "disconnect this peer if don't see keepalives for 90 seconds". So if a
> peer
> > doesn't see acknowledgement for 90 seconds it will disconnect the remote
>
> > peer.
> >
> > fatkid's solution is:
> >
> > dlsw timer sna-retry-interval 60
> >
> > And I'm sure he meant
> >
> > dlsw timer sna-retry-interval 45
>
> If SNA achnowledgments for requests take *over* 45 sec as the task says I
> think anything over 45 seconds is the right answer.
>
> Nodir
>
> >
> > >From: Khalid Nafie <knafie@ncr.com.kw>
> > >Reply-To: Khalid Nafie <knafie@ncr.com.kw>
> > >To: BootCamp <ccielab@groupstudy.com>
> > >Subject: FatKid Advanced DLSW
> > >Date: Fri, 8 Jun 2001 21:19:32 +0300
> > >
> > >Hi guys,
> > > I think the solution is not accurate in the poing #.7 when there is
> > >old SNA system that takes over 45 second to respond on VLAN 2.
> > >the answer is puting 90 second in the PEER statement, i dont know why.
> > >I think the DLSW TIMER command should also be used to the configuration
> > >#DLSW TIMER connect-timeout for. (XID negotiation timeout)
> > >
> > >
> > >Please correct me if i am mistaken.
> > >================================================
> > >Yours,
> > >Khaled Nafie
> > >Network Engineer
> > >Customer Services
> > >MCSE,CCDP,CCNP VOICE ACCESS
> > >NCR Corporation, Kuwait
> > >Mob.: +965-9872046
> > >Tel : +965- 2412201, 2412203
> > >Fax : +965-2413075
> > >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3