From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Sat Jun 09 2001 - 00:48:20 GMT-3
Dean, it's the same as IP access-lists. 1's are don't care bits, and 0's are
care bits. The only two differences are:
1. LSAP is 16 bits, IP address is 32 bits
2. LSAP uses HEX notation, IP uses decimal with dots in between
If you are looking for a specific LSAP, let's say 8137 (ARPA IPX):
you need: 0x8137 0x0000, it means LSAP has to match 0x8137
but let's say you wanted LSAPs from 8130 to 813F, then it would be
0x8137 0x000F
is that what you're looking for?
>From: "Dean, Justin" <Justin.Dean@nrtinc.com>
>Reply-To: "Dean, Justin" <Justin.Dean@nrtinc.com>
>To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>Subject: DLSW LSAP Filtering Question
>Date: Fri, 8 Jun 2001 14:47:59 -0700
>
>Can someone help me understand how to use the lsap masks? I have read some
>of the whitepapers but they just use "permit all sna" and "permit all
>netbios".....I am not trying to do that, but rather block a certain block
>of
>saps. Thanks,
>
>justin
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3