From: Sandro Ciffali (sandyccie@xxxxxxxxx)
Date: Wed Jun 06 2001 - 20:43:10 GMT-3
I had the same problem, I don't remember the ios version, but i had to apply
dialer group both sides.
Sandro
----- Original Message -----
From: "Daniel C. Young" <danyoung99@mediaone.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, June 06, 2001 2:29 AM
Subject: isdn: no dialer-group, no good?
> Folks,
>
> Scenario:
> I had one router with a dialer-group statement calling another router
> without the dialer statement. Dialer map and ppp authentication were in
> place. The call is placed, but no traffic can go through. Pings fail, no
> route exchange. When I configured 'dialer-group' on the called router
> WITHOUT a 'dialer-list' statement, the pings were successful and routing
> tables were updated.
>
> Question:
> Is a 'dialer-group' statement necessary in order to pass traffic through
an
> isdn line? Or, was this an IOS bug?
>
> List of equipment used:
> ISDN Simulator: Emutel Solo
> Calling router: 2503 with 12.0(5)T ED Enterprise with IPSec 56
> Called router: 4500 with 12.0(17) GD Enterprise with F/W and IPSec 56
>
> Many thanks,
>
> Daniel C. Young
> Sr. Network Engineer
> CCNP (ATM, Security & Voice Specialist),
> CCDP, CCSE, MCSE+I
>
> SBC Internet Data Center
> (949) 221-1928 Work
> (714) 350-8945 Cell
> young@pobox.com
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3