From: ANDY NWEBUBE (wizdata@xxxxxxxxxxx)
Date: Wed Jun 06 2001 - 13:37:48 GMT-3
Hi,
there is no difference in particular, but as you very well know, if you
define a static default route, it would not be advertised automatically into
the OSPF domain. You would have to use the Default-information-originate
statement to get it advertised.
By using the redistribute static, it would do the same job but if you had
any other static routes defined on that router, that you dont want
redistributed you would have to do some more configs to eliminate them from
being advertised.
Rergards,
Andy
>From: dongbiao lee <dongbiao@yeah.net>
>Reply-To: dongbiao lee <dongbiao@yeah.net>
>To: "ccielab@groupstudy.com" <ccielab@groupstudy.com>
>Subject: what's the difference?
>Date: Wed, 6 Jun 2001 19:24:24 +0800
>
>in ospf ,what the difference between the commands below:
>A: ip route 0.0.0.0 0.0.0.0 x.x.x.x then redistribute under ospf :red sta
>B;ip route 0.0.0.0 0.0.0.0 x.x.x.x under ospf use the command:
>default-originate always ....
>
>
>
>
> dongbiao lee
> dongbiao@yeah.net
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3