OSPF cost

From: Tomasz Bartel (tbartel@xxxxxxxxxx)
Date: Wed Jun 06 2001 - 13:03:41 GMT-3

• Next message: Chuck Church: "IOS performance between versions - RESULTS!"
• Previous message: Brian: "A BGP announcement problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Guys,

I have questions regarding OSPF comand "area X default-cost". If I would
like to set cost for example 64 for default route in NSSA. In this case
ABR communicate with the rest of the routers in NSSA throw
Ethernet.

R3(ABR) ------ETH----- R1

The question is: do I have to take into consideration cost of Ethernet or
it is possible to set value 64 and it upper inside of NSSA exactly as it is
set.
In my case behavior of this command is strange. Sometimes is 64 but after
reboot is 74.
It looks like router have add a cost of ethernet interface too.

Could somebody explain my this?

Tomek
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Chuck Church: "IOS performance between versions - RESULTS!"
• Previous message: Brian: "A BGP announcement problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3