From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Wed Jun 06 2001 - 11:37:23 GMT-3
WEll one thing i see wrong is you dont have a frame relay map under serial 0
on the term server
----- Original Message -----
From: "Rajeev Siddappa" <raj_lab@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, June 06, 2001 7:12 AM
Subject: Frame-relay Help
> Hi Guys,
>
> I have a problem with fram realy. The configs are a
> follows. I am not able to ping between the two
> routers. I am using the same Access server 8 async
> port to connect between different routers & the same
> as hub router.
>
> Thanks,
> Rajeev.
>
> The scenerios is like
>
>
>
> ----------------------Router _A
> |
> HUB(Term server) -----
>
>
>
> HUB Term Server Configs
>
>
>
> no logging console
> enable password cisco
> !
> ip subnet-zero
> no ip routing
> no ip domain-lookup
> ip host FR_1_SW 2001 2.2.2.2
> ip host FR_2_SW 2002 2.2.2.2
> ip host Router_A 2003 2.2.2.2
> ip host Router_B 2004 2.2.2.2
> !
> !
> !
> interface Loopback0
> ip address 2.2.2.2 255.255.255.0
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no ip route-cache
> no ip mroute-cache
> no fair-queue
> !
> interface Serial0.112 point-to-point
> bandwidth 64
> ip address 172.168.10.1 255.255.255.252
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> frame-relay interface-dlci 112
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> interface TokenRing0
> no ip address
> no ip directed-broadcast
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> ip classless
> !
> !
> line con 0
> transport input none
> line 1 8
> no exec
> exec-timeout 0 0
> transport input all
> flowcontrol hardware
> line aux 0
> line vty 0 4
> login
> !
>
>
> Term_Server#sh frame-relay pvc
>
> PVC Statistics for interface Serial0 (Frame Relay DTE)
>
> DLCI = 112, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE,
> INTERFACE = Serial0.112
>
> input pkts 0 output pkts 93 in
> bytes 0
> out bytes 7675 dropped pkts 0 in
> FECN pkts 0
> in BECN pkts 0 out FECN pkts 0
> out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 93 out bcast bytes 7675
> pvc create time 00:21:42, last time pvc status
> changed 00:12:44
>
>
> Term_Server#sh frame-relay map
> Serial0.112 (up): point-to-point dlci, dlci
> 112(0x70,0x1C00), broadcast
> status defined, active
>
> Term_Server#sh ip route
> Default gateway is not set
>
> Host Gateway Last Use Total
> Uses Interface
> ICMP redirect cache is empty
>
>
>
>
> Config on router A
>
>
> Router_A#sh run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname Router_A
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> !
> !
> interface Ethernet0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface Serial0
> bandwidth 64
> ip address 172.168.10.2 255.255.255.252
> no ip directed-broadcast
> encapsulation frame-relay IETF
> no fair-queue
> frame-relay map ip 172.168.10.1 211
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
> !
> ip classless
> !
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> login
> !
> end
>
>
> Router_A#
> Router_A# sh frame-relay map
> Serial0 (up): ip 172.168.10.1 dlci 211(0xD3,0x3430),
> static,
> IETF, status defined, active
>
>
>
> Router_A#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M
> - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA -
> OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA
> external type 2
> E1 - OSPF external type 1, E2 - OSPF external
> type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS
> level-2, * - candidate default
> U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
> 172.168.0.0/30 is subnetted, 1 subnets
> C 172.168.10.0 is directly connected, Serial0
>
> Router_A#sh frame-relay pvc
>
> PVC Statistics for interface Serial0 (Frame Relay DTE)
>
> DLCI = 211, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE,
> INTERFACE = Serial0
>
> input pkts 274 output pkts 27 in
> bytes 34687
> out bytes 1920 dropped pkts 0 in
> FECN pkts 0
> in BECN pkts 0 out FECN pkts 0
> out BECN pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 12 out bcast bytes 360
> pvc create time 01:33:16, last time pvc status
> changed 00:11:57
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3