From: JUAN FAURE FERRER (jfaure@xxxxxx)
Date: Wed Jun 06 2001 - 08:07:43 GMT-3
Hi Guys!
I've some problems configuring backup for a frame relay line. This line has two
point- to -point PVC's and I want to backup each one by means of "backup inter
face" . Then, I think, if only one of the two is down, the backup will start, i
s it correct? The problem is that I only have 1 BRI for the backup and I can't
put " backup interface bri0/0" in each one.
I've read that using dialer profiles you can dispose the two B channels for dia
l backup, but I don't know the way to do this. The problem also is that the bac
kup call must be done at the same router and the same number (at first, I tried
with 2 dialer profiles, but i couldnt because the remote router and string are
the same)
Any help would be greatly appreaciated.
Best Regards
Juan Faure Ferrer
e-mail: jfaure@ipt.es
Area de Telematica
Integracisn de Redes y Sistemas
IPT SOLUZIONA TELECOMUNICACIONES
c/Jerez, 3 28016 MADRID
Tfno: 91 579 30 00 Fax: 91 350 72 83
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3