From: Haohong Lin (hhlin@xxxxxxxxxx)
Date: Wed Jun 06 2001 - 07:43:52 GMT-3
R4#sh run int as 1
Building configuration...
172.17.59.18/28 is another interface ip address
as follows:
Current configuration:
!
interface Async1
ip address 172.17.59.18 255.255.255.240
no ip directed-broadcast
encapsulation ppp
ip ospf message-digest-key 1 md5 cisco
dialer in-band
async default routing
async mode dedicated
end
----- Original Message -----
From: Marcel Leuenberger
To: Haohong Lin
Cc: CCIELab ; nobody@groupstudy.com
Sent: Wednesday, June 06, 2001 6:21 PM
Subject: Antwort: redistribute rip to ospf
hi ya,
you have typed in the wrong network statement under the ospf-process:
" network 172.17.59.18 0.0.0.0 area 0"
where you have the ip address on ethernet
"172.17.59.81".
.18 is not .81
hope that was the problem.
marcel
+++++++++++++++++++++++++++++++++++++++++++++++++++
Marcel Leuenberger
Dipl.Ing.Inf.HTL
System Engineer
Ascom AG
Bolligenstrasse 56
3000 Bern 22
Phone: ++41 31 999 9944
Fax: ++41 31 999 9904
Marcel.leuenberger@ascom.ch
+++++++++++++++++++++++++++++++++++++++++++++++++++
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3