From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Wed Jun 06 2001 - 02:50:29 GMT-3
Have you tried running dialer watch on it? I believe that only the 12.0(X)T
ED will run it properly. I could only do it on 12.0(5)T but have not tried
it with other versions. Could someone verify this? Oh, and the
summary-address thing on OSPF will only run off the 12.0(7)T.
I myself am using 12.0(5)T ED, 12.0(7)T ED, 12.0(15) GD and 12.0(7) GD,
Enterprise with IPSec 56 or Enterprise with Firewall and IPSec 56.
Daniel C. Young
Sr. Network Engineer
CCNP (ATM, Security & Voice Specialist),
CCDP, CCSE, MCSE+I
SBC Internet Data Center
(949) 221-1928 Work
(714) 350-8945 Cell
young@pobox.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Rob
Webber
Sent: Monday, June 04, 2001 11:20 AM
To: louie kouncar; 'Padhu (LFG)'; 'Roman Rodichev'; dma@cisco.com;
ccielab@groupstudy.com
Subject: RE: Has someone figured out the "BEST VERSION" of IOS for lab
practic e ?...
I will give the same disclaimer as Louie. I used
c2500-jos56i-l.120-14.bin.Z.
So it was 12.0(14) with Enterprise, firewall and IPSec 56. I worked great
compressed onto an 8MB flash.
Rob.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
louie kouncar
Sent: Monday, June 04, 2001 2:01 PM
To: 'Padhu (LFG)'; 'Roman Rodichev'; dma@cisco.com;
ccielab@groupstudy.com
Subject: RE: Has someone figured out the "BEST VERSION" of IOS for lab
practic e ?...
I am using 12.0(9), it is working great and I did not have any problems yet,
I am not saying that this is the best version, all I am saying is that it
works great for me....
I am using the Enterprise IPSEC 56..................
Louie J. Kouncar
TCO3 Senior Data Center Engineer
UUNET
W-703-343-6645
C-703-304-2460
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Padhu (LFG)
Sent: Monday, June 04, 2001 10:16 AM
To: 'Roman Rodichev'; dma@cisco.com; ccielab@groupstudy.com
Subject: Has someone figured out the "BEST VERSION" of IOS for lab
practic e ?...
Has someone figured the "BEST VERSION" of IOS for lab practice ?...
12.0(7)T has problems with ISDN but fixes the summary address problem
12.1(5)has problems with the summary address problem... The /28s don't show
up as externals..
Appreciate any help here.
Cheers,Padhu
-----Original Message-----
From: Roman Rodichev [mailto:rodic000@hotmail.com]
Sent: Saturday, June 02, 2001 7:49 PM
To: dma@cisco.com; ccielab@groupstudy.com
Subject: Re: IOS version 12.0(7)T
I assume you got 3600? try 12.0(7)XK1, it's a better IOS for voip and other
stuff
some day I will have nightmares about 12.0(7)T, this release doesn't support
bunch of NMs for 3600's
>From: David Anderson <dma@cisco.com>
>Reply-To: David Anderson <dma@cisco.com>
>To: ccielab@groupstudy.com
>Subject: IOS version 12.0(7)T
>Date: Sat, 02 Jun 2001 17:13:28 -0700
>
>I was wondering if anyone has experienced any problems with IOS version
>12.0(7)T and ISDN. I looked for a DDTS on it, but could not find it. I
>was told that the only way you can get the OSPF summary address (the
>FLSM-VLSM trick on the ASBR) to show up in your routing table was to use
>version 12.07T. The only problem is when I use this version, I can not get
>my isdn int to work. As soon as I switch IOS versions, the ISDN works
>fine, but I am out the ability to perform the summary address on the
>ASBR. Any suggestions?
>
>Thanks,
>David
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3