From: Don Dettmore (don@xxxxxxxxxxxxx)
Date: Mon Jun 04 2001 - 15:11:33 GMT-3
Jason
To get EIGRP to work in a hub and spoke nbma network, you only need the
spokes to form adjacencies with the hub - its not like OSPF with the DR,
BDR, etc.
The other thing you need to do is disable split horizon on the hub - so the
spoke advertisements will be readvertised out to the other spokes
Don Dettmore
----- Original Message -----
From: "Jason Gardiner" <gardiner@sprint.net>
To: "CCIE" <ccielab@groupstudy.com>
Sent: Monday, June 04, 2001 7:02 AM
Subject: EIGRP with NMBA
> Hello,
>
> I had this config scenario where EIGRP needed the following map
> statement syntax to correctly form adjacencies:
>
> frame-relay map ip 172.16.1.1 102 broadcast
>
> The broadcast keyword was needed on each map statement; EIGRP would not
> be established otherwise. I tried to substitute
>
> router eigrp 100
> neighbor 172.16.1.1
>
> but that didn't work either.
>
> My question is this: Does adding the broadcast keyword cause any
> problems with other configurations (eg. OSFP)? It would be nice to be
> able to use the one frame-relay map statement for all scenarios.
>
>
> --
> Thanks,
>
> Jason Gardiner
> Engineering Services
> Sprint E|Solutions
>
> "The only thing to prevent what's past is to put a stop to it before it
> happens."
> - Sir Boyle Roche
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3