From: Joe Freeman (joe.freeman@xxxxxxxxxxxxxx)
Date: Mon Jun 04 2001 - 11:33:40 GMT-3
I've not yet read all 158 emails, but this is how I would do it...
IF you have routers on each end of the Microwave link, (possibly the
same routers that the T1 terminates into), then you could simply set the
delay on the T1 interface sufficiently high (say 60000) or so, which
would cause EIGRP to prefer the Microwave link, except for when it is
not there.
Joe Freeman
Rajeev Siddappa wrote:
> hey guys,
>
> I have a 11 mb microwave connection to other site.
> The microwave link box is connect to the network
> using an ethernet connection.
>
> There is a T1 link whcih acts as an back up for the
> microwave. the ciso router is runnig EIGRP.
>
> can any one suggest how to bring up the seriaal link
> with T1 circut up once the microwave goes down.
>
> pls suggest me some thing.
>
> with regards,
> Rajeev.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3