From: Brian (signal@xxxxxxxxxx)
Date: Mon Jun 04 2001 - 03:05:07 GMT-3
I am working on a scenerio where a BRI line
is backing up a serial connection. The BRI
is set as an "ip ospf demand", yet I find
that packets to 224.0.0.5 are bringing the
link up still. If I set the network type
on the BRI lines to "ip ospf network non-broadcast"
then all is well, but if I leave it as the default
for a BRI, which is point-to-point, it will
keep getting brought up by traffic to 224.0.0.5.
Does anyone have any insight to share? I have
seen plenty of demand circuit examples where it
just uses network type of point-to-point.
Brian
-----------------------------------------------
Brian Feeny e:signal@shreve.net
CCNP+Voice/ATM/Security p:318.222.2638x109
CCDP f:318.221.6612
Network Administrator
ShreveNet Inc. (ASN 11881)
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3