From: Curtis Phillips (phillipscurtis@xxxxxxxxxxxx)
Date: Sun Jun 03 2001 - 18:47:37 GMT-3
Did you remember to make the bri interface passive in igrp?
Rodgers Moore <rodgers@the-moores.org> wrote:
>
> check a few things.
> 1) what traffic is interesting to the dialer-list. Have you denied ospf?
> 2) consider adding "no peer neighbor-route" to the BRI interfaces.
>
> Rodgers Moore
>
> Cheong Kok Yong wrote:
>
> > Hi,
> >
> > I've seen discussion mentioning the ISDN line is stay up (section 2, task
> > 3), the issue that brought up was the ISDN is up because of the
> > redistribution of IGRP--->OSPF at R5, and the redistribution of connected i
n
> > R6, but both side I've put in the route map to only allow specific route to
> > be redistributed (at R5, only allow R4 serial 0 network & E0 network to be
> > redistributed to OSPF, and at R6, only allow R6 serial 0 network to be
> > redistributed to OSPF using route-map), but the line is still coming up, an
d
> > funny is that the even with the demand-circuit configured, "show ip ospf
> > neig" display that the BRI0 deadtime timer is keep on resetting by Hello
> > (meaning that timer will not count down to 0, even "sh ip ospf int bri0
> > state that suppressed hello).
> >
> > So, I tried taking out all the redistribution route to OSPF at R5 & R6 and
> > even shut down serial 0 of R4 (make sure IGRP is not running). but the isdn
> > line is still being brought up by 224.0.0.5
> >
> > appreciate your help !!!
> >
> > r5#sh ip os ne
> >
> > Neighbor ID Pri State Dead Time Address Interface
> > 137.20.64.1 1 FULL/ - 00:00:35 137.20.48.2 BRI0
> > 137.20.16.3 1 FULL/DR 00:00:37 137.20.16.3 Ethernet0
> > 137.20.64.1 100 FULL/BDR 00:00:37 137.20.16.2 Ethernet0
> > 137.20.3.33 1 FULL/ - 00:01:57 137.20.1.35 Serial0.1
> > 200.200.200.1 1 FULL/ - 00:00:36 137.20.13.1 Serial1
> > r5#sh ip os ne
> >
> > Neighbor ID Pri State Dead Time Address Interface
> > 137.20.64.1 1 FULL/ - 00:00:33 137.20.48.2 BRI0
> > 137.20.16.3 1 FULL/DR 00:00:36 137.20.16.3 Ethernet0
> > 137.20.64.1 100 FULL/BDR 00:00:36 137.20.16.2 Ethernet0
> > 137.20.3.33 1 FULL/ - 00:01:56 137.20.1.35 Serial0.1
> > 200.200.200.1 1 FULL/ - 00:00:39 137.20.13.1 Serial1
> > r5#sh ip os ne
> >
> > Neighbor ID Pri State Dead Time Address Interface
> > 137.20.64.1 1 FULL/ - 00:00:39 137.20.48.2 BRI0
> > 137.20.16.3 1 FULL/DR 00:00:39 137.20.16.3 Ethernet0
> > 137.20.64.1 100 FULL/BDR 00:00:35 137.20.16.2 Ethernet0
> > 137.20.3.33 1 FULL/ - 00:01:59 137.20.1.35 Serial0.1
> > 200.200.200.1 1 FULL/ - 00:00:39 137.20.13.1 Serial1
> > r5#
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:17 GMT-3