From: garry baker (fallow46@xxxxxxxxx)
Date: Fri Jun 01 2001 - 01:03:16 GMT-3
Rob,
I think you do need that second dialer map statement
because that is the network he is watching. CCO says
that you need a dialer map statement for networks that
you are watching. I tired it without that second
statement and had no joy, as soon as i put it in
everything worked like they say it should.
Garry
--- Rob Webber <rwebber@callisma.com> wrote:
> I would try getting rid of the
>
> dialer map ip 192.168.20.0 name r2 broadcast 384020
>
> You definitely should not need that under your BRI
> interface...other than
> that it looks good to me...
>
> Rob.
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> Daniel C. Young
> Sent: Thursday, May 31, 2001 5:12 PM
> To: ccielab@groupstudy.com
> Subject: dialer watch over isdn for eigrp
>
>
> Group,
>
> Can't seem to get this working: r1 is connected to
> r2 via s1 and br0 (legacy
> ddr) for backup with both running eigrp. The isdn
> works fine when tested
> with floating statics and backup interfaces. But
> with the dialer watch isdn
> just will not dial, although 'debug dialer' shows
> dialer watch recognizing
> the primary link going down:
>
> r1(config)#int s1
> r1(config-if)#sh
> r1(config-if)#
> 02:14:18: DDR: Dialer Watch: watch-group = 10
> 02:14:18: DDR: network 192.168.20.0/255.255.255.0
> DOWN,
> 02:14:18: DDR: primary DOWN
> 02:14:18: DDR: Dialer Watch: Dial Reason: Primary of
> group 10 DOWN
> 02:14:18: DDR: Dialer Watch: watch-group = 10,
> 02:14:18: DDR: Dialer Watch: watch-group = 10
> 02:14:18: DDR: network 192.168.20.0/255.255.255.0
> DOWN,
> 02:14:18: DDR: primary DOWN
> 02:14:18: DDR: Dialer Watch: Dial Reason: Primary of
> group 10 DOWN
> 02:14:18: DDR: Dialer Watch: watch-group = 10,
> r1(config-if)#
> r1(config-if)#^Z
> 02:14:20: %LINK-5-CHANGED: Interface Serial1,
> changed state to
> administratively down
> 02:14:21: %LINEPROTO-5-UPDOWN: Line protocol on
> Interface Serial1, changed
> state to down
> r1#s isdn act
>
----------------------------------------------------------------------------
> ----
> ISDN ACTIVE CALLS
>
----------------------------------------------------------------------------
> ----
> History table has a maximum of 100 entries.
> History table data is retained for a maximum of 15
> Minutes.
>
----------------------------------------------------------------------------
> ----
> Call Calling Called Remote Seconds
> Seconds
> Seconds Charges Type Number Number
> Name
> Used Left Idle Units/Currency
>
----------------------------------------------------------------------------
> ----
>
----------------------------------------------------------------------------
> ----
>
> Relevant configs on R1:
> interface Ethernet0
> ip address 192.168.10.1 255.255.255.0
> no ip directed-broadcast
> no keepalive
> !
> interface Serial1
> ip address 10.12.12.1 255.255.255.0
> no ip directed-broadcast
> shutdown
> !
> interface BRI0
> ip address 172.16.12.1 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer map ip 172.16.12.2 name r2 broadcast 384020
> dialer map ip 192.168.20.0 name r2 broadcast 384020
> dialer watch-group 10
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 3840000001
> isdn spid2 3840000002
> ppp authentication chap
> !
> router eigrp 1
> network 10.0.0.0
> network 172.16.0.0
> network 192.168.10.0
> no auto-summary
> !
> access-list 101 deny eigrp any any log
> access-list 101 permit ip any any
> dialer watch-list 10 ip 192.168.20.0 255.255.255.0
> dialer-list 1 protocol ip list 101
>
> Just in case, configs for R2:
> interface Ethernet0
> ip address 192.168.20.2 255.255.255.0
> no ip directed-broadcast
> no keepalive
> !
> interface Serial0
> no ip address
> no ip directed-broadcast
> no ip mroute-cache
> shutdown
> !
> interface Serial1
> ip address 10.12.12.2 255.255.255.0
> no ip directed-broadcast
> clockrate 2000000
> !
> interface BRI0
> ip address 172.16.12.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 3840200001
> isdn spid2 3840200002
> ppp authentication chap
> !
> router eigrp 1
> network 10.0.0.0
> network 172.16.0.0
> network 192.168.20.0
> no auto-summary
> !
> dialer-list 1 protocol ip permit
>
> Many thanks in advance,
>
> Daniel C. Young
> Sr. Network Engineer
> (909) 221-1928 Direct
> dan.young@sbc.com
>
> SBC Internet Data Center
> 2681 Kelvin Ave.
> Irvine, CA 92614
> (949) 221-1900 Main
> (949) 221-1978 Fax
> **Please
> read:http://www.groupstudy.com/list/posting.html
> **Please
> read:http://www.groupstudy.com/list/posting.html
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:16 GMT-3