From: louie kouncar (lkouncar@xxxxxx)
Date: Thu May 31 2001 - 15:01:24 GMT-3
Yes, It is possible to connect the ATM MM back to back,I am using this in my
lab.........
Louie J. Kouncar
TCO3 Senior Data Center Engineer
UUNET
W-703-343-6645
C-703-304-2460
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
stasbihsazan@comtech.com.au
Sent: Thursday, May 31, 2001 1:16 PM
To: ccielab@groupstudy.com
Subject: ATM OC3MM back-to-back
Hi Everyone,
I have two ATM OC3MM interfaces for 2600s and two cisco 2600s. I am
wondering if
you can actually connect them back to back.
I had a good look at cisco's website - CCO and could not find anything
A config or any sort of help would be greatly appreciated
Cheers
****************************************************************************
**
- NOTICE -
This email and any attachments are confidential, may contain proprietary or
legally privileged information and are intended solely for named addressees
only. No confidentiality, privilege or copyright is waived or lost by any
mistransmission. If you have received this email in error please notify the
sender and delete immediately.
Please be advised that internet communications are not secure and that is
your
responsibility to scan this message and any attachments to it for computer
viruses or other defects. If you download a file attached to this message,
you
do so at your own risk. Under no circumstances do we accept liability
for any loss or damage (including any indirect or consequential losses)
which
may result, directly or indirectly, from your receipt of this message or any
attachments.
****************************************************************************
**
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3