From: Zeng Puyang (zbridge98@xxxxxxxxx)
Date: Thu May 31 2001 - 03:33:03 GMT-3
Hi, check the achieve, you can find thourands of post discuss on this topic.
Good luck
Zeng
----- Original Message -----
From: "Chun-Yu Chen" <chunyuchen@kimo.com.tw>
To: "CCIE Group Study" <ccielab@groupstudy.com>
Sent: Thursday, May 31, 2001 1:29 PM
Subject: Route redistribute problem release 2
> Dear all,
>
> I have a problem about route redistribute.
> The figure as following,
>
> IGRP OSPF-Area0
> ------R1----------R2-----------R3------
> R1---R2 Serial 0---IGRP
> R2---R3 Ethernet0--OSPF--Area0
>
> R1 loopback0 ip address is 120.1.1.1/24--IGRP
> R2 loopback0 ip address is 120.1.2.1/28--OSPF Area0
> R3 loopback0 ip address is 120.1.3.1/24--OSPF Area1
>
> The Problem is /28 subnet bits can't redistribute to IGRP,
> I need use summarization in the R2 and R3.
> I have use "area 1 range 120.1.3.0 255.255.255.0" in the R3 and "area 0
> 120.1.2.0 255.255.255.0" in the R2.
> The R2 Can't summary the 120.1.2.0/24, R3 can sent the summary route to R2 an
d
> redistribute to IGRP.
>
> Could you tell me why?
> **Please read:http://www.groupstudy.com/list/posting.html
|:"f
|g-J+~7&!"\"fv7,1+a6Zy
_rj(}J&
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3