route redistribute problem

From: Chun-Yu Chen (chunyuchen@xxxxxxxxxxx)
Date: Thu May 31 2001 - 00:02:40 GMT-3

• Next message: Todd Veillette: "OT:Plan on attending ecp1 in NYC Sep. 17?"
• Previous message: hiler john: "they corrected many mistakes on cco now."
• Next in thread: Horace Chan: "Re: route redistribute problem"
• Maybe reply: Horace Chan: "Re: route redistribute problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Dear all,

I have a problem about route redistribute.
The figure as following,

              IGRP OSPF-Area0
------R1----------R2-----------R3------
R1---R2 Serial 0---IGRP
R2---R3 Ethernet0--OSPF--Area0

R1 loopback0 ip address is 120.1.3.1/24--IGRP
R2 loopback0 ip address is 120.1.2.1/28--OSPF Area0
R3 loopback0 ip address is 120.1.3.1/24--OSPF Area1

The Problem is /28 subnet bits can't redistribute to IGRP,
I need use summarization in the R2 and R3.
I have use "area 1 range 120.1.3.0 255.255.255.0" in the R3 and "area 0
120.1.2.0 255.255.255.0" in the R2.
The R2 Can't summary the 120.1.2.0/24, R3 can sent the summary route to R2 and
redistribute to IGRP.

Could you tell me why?

Regards
Jerry
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Todd Veillette: "OT:Plan on attending ecp1 in NYC Sep. 17?"
• Previous message: hiler john: "they corrected many mistakes on cco now."
• Next in thread: Horace Chan: "Re: route redistribute problem"
• Maybe reply: Horace Chan: "Re: route redistribute problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3