From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Wed May 30 2001 - 19:22:28 GMT-3
Garry: You can use the icanreach mac-address command to identify the
NetBIOS host although it's more commonly used for SNA. The icanreach
netbios-name is more generally used for NetBIOS hosts.
You can also use the dmac-output-list <700-799> in a peer statement or
in a defaults statement for NetBIOS hosts. In this case, if you are
using permit statements, you need to permit the NetBIOS broadcast
address 0xc0 00 00 00 00 80.
HTH, Fred
garry baker wrote:
>
> Guys,
>
> This may be a silly question. If you are talking only
> netbios,netbeui, over dlsw is there any point in using
> the icanreach mac-address command to advertise an
> address or do you have to use the icanreach
> netbios-name command to advertise the "address?"
>
> Assuming the answer to the above question is no, when
> would you use the icanreach mac-address command?
> knowing next to diddlely about sna, would you use it
> only in an sna environment?
>
> Garry
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3