From: Michael Davis (miked@xxxxxxxxxx)
Date: Wed May 30 2001 - 14:07:14 GMT-3
This command will display all the information of the physical interface
about IMA. Hope this helps.
Mike
#7303
Router#sh ima int atm3/ima0 detailed
Interface ATM3/IMA0 is up
Group index is 1
Ne state is operational, failure status is noFailure
Active links bitmap 0xF
IMA Group Current Configuration:
Tx/Rx configured links bitmap 0xF/0xF
Tx/Rx minimum required links 4/4
Maximum allowed diff delay is 25ms, Tx frame length 128
Ne Tx clock mode CTC, configured timing reference link ATM3/0
Test pattern procedure is disabled
Detailed group Information:
Tx/Rx Ima_id 0x30/0x10, symmetry symmetricOperation
Number of Tx/Rx configured links 4/4
Number of Tx/Rx active links 4/4
Fe Tx clock mode ctc, Rx frame length 128
Tx/Rx timing reference link 0/0
Maximum observed diff delay 0ms, least delayed link 2
Running seconds 4762
GTSM last changed 01:02:58 UTC Mon Mar 1 1993
IMA Group Current Counters (time elapsed 82 seconds):
0 Ne Failures, 0 Fe Failures, 0 Unavail Secs
IMA Group Interval(1) Counters:
0 Ne Failures, 0 Fe Failures, 0 Unavail Secs
IMA Group Interval(2) Counters:
0 Ne Failures, 0 Fe Failures, 0 Unavail Secs
IMA Group Interval(3) Counters:
0 Ne Failures, 0 Fe Failures, 0 Unavail Secs
IMA Group Interval(4) Counters:
3 Ne Failures, 3 Fe Failures, 20 Unavail Secs
IMA Group Total Counters (last 4 15 minute intervals):
3 Ne Failures, 3 Fe Failures, 20 Unavail Secs
Detailed IMA link Information:
Interface ATM3/0 is up
ifIndex 2, Group Index 1, Row Status is active
Tx/Rx Lid 0/0, relative delay 0ms
Ne Tx/Rx state active/active
Fe Tx/Rx state active/active
Ne Rx failure status is noFailure
Fe Rx failure status is noFailure
Rx test pattern 0x40, test procedure disabled
IMA Link Current Counters (time elapsed 82 seconds):
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(1) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(2) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(3) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(4) Counters:
1 Ima Violations, 1 Oif Anomalies
0 Ne Severely Err Secs, 10 Fe Severely Err Secs
0 Ne Unavail Secs, 12 Fe Unavail Secs
20 Ne Tx Unusable Secs, 2 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 20 Fe Rx Unusable Secs
0 Ne Tx Failures, 1 Ne Rx Failures
0 Fe Tx Failures, 1 Fe Rx Failures
IMA Link Total Counters (last 4 15 minute intervals):
1 Ima Violations, 1 Oif Anomalies
0 Ne Severely Err Secs, 10 Fe Severely Err Secs
0 Ne Unavail Secs, 12 Fe Unavail Secs
20 Ne Tx Unusable Secs, 2 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 20 Fe Rx Unusable Secs
0 Ne Tx Failures, 1 Ne Rx Failures
0 Fe Tx Failures, 1 Fe Rx Failures
Interface ATM3/1 is up
ifIndex 3, Group Index 1, Row Status is active
Tx/Rx Lid 1/1, relative delay 0ms
Ne Tx/Rx state active/active
Fe Tx/Rx state active/active
Ne Rx failure status is noFailure
Fe Rx failure status is noFailure
Rx test pattern 0x40, test procedure disabled
IMA Link Current Counters (time elapsed 146 seconds):
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(1) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(2) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(3) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(4) Counters:
4 Ima Violations, 3 Oif Anomalies
0 Ne Severely Err Secs, 10 Fe Severely Err Secs
0 Ne Unavail Secs, 12 Fe Unavail Secs
20 Ne Tx Unusable Secs, 2 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 19 Fe Rx Unusable Secs
0 Ne Tx Failures, 1 Ne Rx Failures
0 Fe Tx Failures, 1 Fe Rx Failures
IMA Link Total Counters (last 4 15 minute intervals):
4 Ima Violations, 3 Oif Anomalies
0 Ne Severely Err Secs, 10 Fe Severely Err Secs
0 Ne Unavail Secs, 12 Fe Unavail Secs
20 Ne Tx Unusable Secs, 2 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 19 Fe Rx Unusable Secs
0 Ne Tx Failures, 1 Ne Rx Failures
0 Fe Tx Failures, 1 Fe Rx Failures
Interface ATM3/2 is up
ifIndex 4, Group Index 1, Row Status is active
Tx/Rx Lid 2/2, relative delay 0ms
Ne Tx/Rx state active/active
Fe Tx/Rx state active/active
Ne Rx failure status is noFailure
Fe Rx failure status is noFailure
Rx test pattern 0x40, test procedure disabled
IMA Link Current Counters (time elapsed 157 seconds):
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
0 Fe Tx Unusable Secs, 0 Fe Rx Unusable Secs
0 Ne Tx Failures, 0 Ne Rx Failures
0 Fe Tx Failures, 0 Fe Rx Failures
IMA Link Interval(1) Counters:
0 Ima Violations, 0 Oif Anomalies
0 Ne Severely Err Secs, 0 Fe Severely Err Secs
0 Ne Unavail Secs, 0 Fe Unavail Secs
0 Ne Tx Unusable Secs, 0 Ne Rx Unusable Secs
----- Original Message -----
From: "louie kouncar" <lkouncar@UU.NET>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 30, 2001 12:41 PM
Subject: How to find the IFindex on a router?
> Hello Group,
>
> I have a question about the IFindex value for a router's interface, Is
there
> a way or a command that can show me the IFindex value for a particular
> interface?
>
> Thank you for any feedback on this issue.................
>
>
>
>
>
> Louie J. Kouncar
> TCO3 Senior Data Center Engineer
> UUNET
> W-703-343-6645
> C-703-304-2460
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3