From: Ilya Mazhara (willy@xxxxxxxxxxxxxxxx)
Date: Wed May 30 2001 - 08:49:44 GMT-3
U need L3 swirch(router) to obtain this - ACL & port (mac) security.
cao lingwei wrote:
>
> sorry all
> I could not say the question clearly.
> the ip address is not used to telnet or snmp to the switch.
> only this ip address & this mac on this port,can exchange
> data with other hosts in other ports.
>
> ----- Original Message -----
> From: "Richard Gallagher" <rgallagh@cisco.com>
> To: "cao lingwei" <caolw@fosco.com.cn>
> Sent: Wednesday, May 30, 2001 4:58 PM
> Subject: Re: about switch security
>
> > I would suggest something like this:
> >
> > - set port security 2/21 enable 00-01-00-01-00-01
> >
> > - set ip permit 1.1.1.1
> >
> > Rich
> >
> > On May 30, 9:51am, cao lingwei chatted about:
> > > Subject:about switch security
> > > In my pratice lab:
> > > config Catalyst 5002's port 2/21 security
> > > only permit ip address 1.1.1.1 and mac address
> > > 0001.0001.0001 can connect this switch.
> > > How does it?
> > > What does ip address control in switch?
> > > **Please read:http://www.groupstudy.com/list/posting.html
> > >-- End of waffle from cao lingwei
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3