From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Wed May 30 2001 - 07:14:10 GMT-3
Earlier in the month I posted a question on how you could have multiple
commands coming from one menu item i.e. user presses key 1 and it shuts down
an interface. I have eventually came up with a solution which is posted
below. Just in case anyone out there has to do the same.
have a menu which calls a file from the flash and copies it into your
running config
menu EMOS text 1 SHUTDOWN LUCY
menu EMOS command 1 copy slot0:shut91 runn
menu EMOS text 2 SHUTDOWN ANDERSON
menu EMOS command 2 copy slot0:shut92 runn
menu EMOS text 3 SHUTDOWN CUMMING
menu EMOS command 3 copy slot0:shut93 runn
menu EMOS text 4 SHUTDOWN DAVIDSON
menu EMOS command 4 copy slot0:shut94 runn
blah blah blah
the flash looks like
2 -rw- 10467208 Jan 05 2001 05:12:37 c7200-js-mz.121-4.bin
15 -rw- 28 May 22 2001 11:01:33 open91
17 -rw- 28 May 22 2001 11:01:42 open92
18 -rw- 28 May 22 2001 11:01:47 open93
19 -rw- 28 May 22 2001 11:01:56 open94
20 -rw- 28 May 22 2001 11:02:01 open95
21 -rw- 28 May 22 2001 11:02:06 open96
22 -rw- 25 May 22 2001 11:02:12 shut91
23 -rw- 25 May 22 2001 11:02:17 shut92
24 -rw- 25 May 22 2001 11:02:21 shut93
25 -rw- 25 May 22 2001 11:02:26 shut94
26 -rw- 25 May 22 2001 11:02:30 shut95
27 -rw- 25 May 22 2001 11:02:34 shut96
the file called shut91 looks like
more flash:shut91
int fast0/0.91
shut
end
note the file has to end with "end" otherwise you will have unexpected end
of file in your logs every time the command is issued. I used this menu as
a means for users in a 24 hour by 7 support team who know very little about
Cisco equipment to allow them to shut or open interfaces depending on what
is needed. I had to do this as we have backup servers in a different
location which surprise surprise require the same IP address as its primary
server.
HTH anyone in the near future.
Robert McCallum
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:57 GMT-3