From: Darren Hosking (dhosking@xxxxxxxxxxxxxxxx)
Date: Sun May 27 2001 - 07:36:05 GMT-3
I've got a single BRI (Australian OnRamp 2, basic-net3) that I'd like to use
for my lab study so I don't have to buy an ISDN emulator or another OnRamp
2. It should be possible to make calls from one B-channel to the other but
it doesn't quite work.
I've plugged each router into the 2 port SBUS provided with the OnRamp 2.
Both routers get TEI but when dialling I get "NO CHANNEL AVAILABLE" (on both
routers) and then the TEI goes down (see below). Both routers can dial
elsewhere without a problem.
I'm using the bri0 interface on each router, do I need to actually assign a
B-channel to each router?
Any tips appreciated.
Thanks, Darren
10:52:49: ISDN BR0: RX <- RELEASE_COMP pd = 8 callref = 0x86
10:52:49: Cause i = 0x82A2 - No channel available
10:52:49: Display i = 'NO CHANNEL AVAILABLE'
10:53:04: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 73 changed to
down
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:54 GMT-3