From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Fri May 25 2001 - 13:59:25 GMT-3
Group,
I am in the process of upgrading my IOS to a 2513 w/ 16/16. Originally it
only had 1 flash memory stick and 1 flash partition. After I inserted the
send 8 MB stick, "show flash" and "show version" displays 2 partitons. So I
went erased the 2nd partition and then went into "config t" and did a
"partitition flash 1" to have only 1 partition. Next I did a "copy tftp
flash", but the process failed in the middle.
I am not in ROM mode running the backup IOS. Everytime I try to do a "copy
tftp flash" now, I get the following error message:
Router(boot)#cop tft flas
System flash directory:
No files in System flash
[0 bytes used, 16777216 available, 16777216 total]
Address or name of remote host [172.16.1.10]?
Source file name? c2500-is-l.120-9.bin
Destination file name [c2500-is-l.120-9.bin]?
Accessing file 'c2500-is-l.120-9.bin' on 172.16.1.10...
Loading c2500-is-l.120-9.bin from 172.16.1.10 (via Ethernet0): ! [OK]
Device needs erasure before copying new file
Erase flash device before writing? [confirm]
Copy 'c2500-is-l.120-9.bin' from server
as 'c2500-is-l.120-9.bin' into Flash WITH erase? [yes/no]y
Erasing device...
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee .
..erased
Loading c2500-is-l.120-9.bin from 172.16.1.10 (via Ethernet0):
!!!!!!!!!!!!!!!!!!!Parity
(control reg=0x8318) Error, address: 0xE085B8 at 0x1098EB0 (PC)
Am I missing something obvious? Is it because I have not properly
re-partitioned? If so, how do I do that? Please help.
Regards,
Daniel C. Young
Sr. Network Engineer
CCNP (ATM, Security & Voice Specialist),
CCDP, CCSE, MCSE+I
SBC Internet Data Center
(949) 221-1928 Work
(714) 350-8945 Cell
young@pobox.com
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:53 GMT-3