From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Thu May 24 2001 - 11:09:01 GMT-3
Chia:
I1 ISDN circuit has 2 BRI channels, You would need to order another
ISDN channel and NT module for your router, so you would have a total of 2
modules for ISDN. Then in your router config you could point multiple spids
and dialer maps to one destination. However you cannot have 3 BRI on 1 ISDN
pair. You must have 2 ISDN circuits going into the same router with 2 ISDN
modules.
----- Original Message -----
From: "Chia Kim Seng, Consultant, SCSNW-Sales"
<chiaks@scsnetworks.scs.com.sg>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 23, 2001 11:18 PM
Subject: OFF TOPIC - Multilink multiple BRI
> Hi guys,
>
> I had a question relating to my work. Need some advise and help.
>
> We can multilink two B channel for one BRI using 'multilink ppp'.
> But can we multilink multiple BRI (say three BRI resulting six B channel)
> together and treat this as one big link?
> My customer is asking for such implementation.
>
> If this is possible, how can we do it? Using what method (using dialer
> profile or rotatry group)?
>
> Thanks guys for reading my mail.
>
> Regards
> Chia Kim Seng
>
> SCS Networks Pte Ltd
> 7 Bedok South Road
> Singapore 469272
> Tel : 065-2403164
> Fax: 065-2403110
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:52 GMT-3