From: David Anderson (dma@xxxxxxxxx)
Date: Wed May 23 2001 - 15:24:04 GMT-3
Thanks Andy. I believe I tried that last night and it still would not show
up, but I will try it again later and see if it works.
David
At 07:10 PM 5/23/2001 +0100, Andrew Lennon wrote:
>David,
>
>change your ospf from
>network 172.21.19.0 0.0.0.255 area 0
>to
>net 172.21.19.0 0.0.0.15 area 0
>
>Andy
>
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>David Anderson
>Sent: 23 May 2001 16:53
>To: ccielab@groupstudy.com
>Subject: ospf/28 to igrp/24
>
>
>Hi everyone,
>First, I would like to thank everyone who responded to my redistribution
>question a couple of days ago. I am still not able to get the summary route
>to show up in my ospf routers or my igrp router. Below is the scenario
>along with my configs. If anyone sees any reason why the routes are not
>showing up, please let me know.
>
>Scenario:
>
>R1, R2, R3, R4 are connected over a frame cloud (R1 being the hub). R1,
>R2, R3 are in OSPF area 0 using a /28 subnet mask. R1, R4 are running IGRP
>with a /24 subnet mask. R1 is the ASBR and is performing mutual
>redistribution. All the routes except for the summary route are in the
>routing tables...accordingly
>Thanks for the help.........
>
>
>The configs:
>
>R1#
>int loopback 0
>ip address 172.1.1.1 255.255.255.0
>
>int S0
>encapsulation Frame Relay
>Frame-Relay lmi-type ansi
>
>int S0.1 point-to-point (connected to R4)
>ip address 172.21.18.1 255.255.255.0
>frame-relay interface-dlci 104
>
>int S0.2 multipoint
>ip address 172.21.19.1 255.255.255.240
>frame-relay map ip 172.21.19.2 102 broadcast
>frame-relay map ip 172.21.19.3 103 broadcast
>ip ospf network non-broadcast
>ip ospf priority 100
>
>router ospf 1
>network 172.21.19.0 0.0.0.255 area 0
>network 172.21.1.1 0.0.0.0 area 0
>neighbor 172.21.19.2
>neighbor 172.21.19.3
>redistribute igrp 1 subnets
>redistribute connected subnets
>distribute-list 1 out
>summary-address 172.21.19.0 255.255.255.0
>
>router igrp 1
>network 172.21.0.0
>redistribute ospf 1 metric 64000 2000 255 1 1500
>passive-interface s0.2
>
>access-list 1 permit 172.21.19.0 0.0.0.255
>
>R2#
>int loopback 0
>ip address 172.1.2.1 255.255.255.0
>
>int S0
>encapsulation Frame Relay
>Frame-Relay lmi-type ansi
>ip address 172.21.19.2 255.255.255.240
>frame-relay map ip 172.21.19.3 201 broadcast
>frame-relay map ip 172.21.19.1 201 broadcast
>ip ospf network non-broadcast
>ip ospf priority 0
>
>router ospf 1
>network 172.21.19.0 0.0.0.255 area 0
>network 172.21.2.1 0.0.0.0 area 0
>
>R3#
>int loopback 0
>ip address 172.1.3.1 255.255.255.0
>
>int S0
>encapsulation Frame Relay
>Frame-Relay lmi-type ansi
>ip address 172.21.19.3 255.255.255.240
>frame-relay map ip 172.21.19.2 301 broadcast
>frame-relay map ip 172.21.19.1 301 broadcast
>ip ospf network non-broadcast
>ip ospf priority 0
>
>router ospf 1
>network 172.21.19.0 0.0.0.255 area 0
>network 172.21.3.1 0.0.0.0 area 0
>
>R4#
>int loopback 0
>ip address 172.21.4.1 255.255.255.0
>
>int S0 (connected to R1 S0.1)
>ip address 172.21.18.4 255.255.255.0
>ip split-horizon
>frame-relay map ip 172.21.18.1 401 broadcast
>encapsulation Frame-Relay
>Frame-Relay lmi-type ansi
>
>router igrp 1
>network 172.21.0.0
>David Anderson
>Network Design Engineer
>Enterprise Solutions Architecture & Design
>(408) 853-5515
>dma@cisco.com
> | |
> ..:|||||||:...:|||||||:..
>C I S C O S Y S T E M S
>**Please read:http://www.groupstudy.com/list/posting.html
David Anderson
Network Design Engineer
Enterprise Solutions Architecture & Design
(408) 853-5515
dma@cisco.com
| |
..:|||||||:...:|||||||:..
C I S C O S Y S T E M S
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:50 GMT-3