From: Ashok Gopala (agopala@xxxxxxxxx)
Date: Tue May 22 2001 - 19:05:35 GMT-3
Yes, that is correct.
Further, the wild card mask does not function a it does in ospf. You can
use the wildcard mask to include only some interfaces in eigrp and not
others (if we have more than one interface in the same natural mask and
different subnet masks)..
Hope this helps!
On Tue, 22 May 2001, Martin, Chris wrote:
> You dont specify the wild card mask bits under the router eigrp command. you
> specify the network and use no auto-summary for discontigeous networks.
>
> so if i had a interface of 10.1.1.1 255.255.255.0 i would add network
> 10.1.1.0 under eigrp network statement, with no auto summary
> try it
>
> ----- Original Message -----
> From: "Himawan Nugroho" <nhimawan@id.ibm.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, May 22, 2001 1:47 PM
> Subject: wildcard mask for eigrp
>
>
> > this is really dump question, but I have to ask:
> >
> > how can I get wildcard mask after network statement in eigrp?
> >
> > in my 2600 series:
> > 2611B(config)#router eigrp 5
> > 2611B(config-router)#network 1.1.1.1 ?
> > <cr>
> >
> > but for 1700 series:
> > 1720A(config)#router eigrp 200
> > 1720A(config-router)#network 5.5.5.5 ?
> > A.B.C.D EIGRP wild card bits
> > <cr>
> >
> > is it IOS? (both use 12)
> >
> >
> > Regards,
> > Himawan Nugroho
> > Network Solutions Specialist
> > IBM Global Services - Indonesia
> > Voice : 62-21-5238897, Fax : 62-21-2512933
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
Ashok Gopala
---------------------------------------------------
Enterprise Support Program | |
Bldg: J, 255 W. Tasman Dr. ||| |||
San Jose CA. 95134 ..:|||||:..:|||||:..
Cisco Systems
---------------------------------------------------
Empowering the Internet Generation
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:49 GMT-3