From: michale_lee50@xxxxxxxxxxx
Date: Tue May 22 2001 - 15:05:01 GMT-3
Dave,
did you try area area-range in OSPF ?, also did you check down stream in
IGRP to see if the summary-address appeared ?
Mr.Lee
----- Original Message -----
From: "David Anderson" <dma@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, May 22, 2001 12:13 AM
Subject: redist question cont'd
> Hi,
> Can someone give a redistribution challenged brother a hand? :)
>
> I have an ASBR router with one interface in OSPF area 0. It has a network
> address of 172.21.19.0/28 and another interface in an IGRP domain with a
> network address of 172.21.18.0/24. I need to get my IGRP router pinging
> the /28 network. The best answer I got was to create a summary-address on
> the ASBR router (summarizing the /28 network to a /24). OSPF will this
> this is a /24 network from IGRP and will then redistribute it into the
IGRP
> domain. My only problem is; what summary-address do I use? I tried
> summary-address 172.21.19.0 255.255.255.0 but it would not show up in any
> of my OSPF routers as a summary route. I also tried the major network
> address of 172.21.0.0 255.255.255.0 but still had not luck with it
> appearing in routing tables. Any suggestions?
>
> Thanks again,
> David
> David Anderson
> Network Design Engineer
> Enterprise Solutions Architecture & Design
> (408) 853-5515
> dma@cisco.com
> | |
> ..:|||||||:...:|||||||:..
> C I S C O S Y S T E M S
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:48 GMT-3