From: Virnoche, Phil (phil.virnoche@xxxxxxxxx)
Date: Tue May 22 2001 - 11:24:39 GMT-3
Gang-
I'm trying to practice netbios name filtering in DLSW..... to no avail. Even
after a clear dlsw reach at R5 (remote-peer) ALL netbios names appear......
What am i missing?
hostname r1
!
netbios access-list host famallowed permit phil
netbios access-list host famallowed permit greg
netbios access-list host famallowed permit jay
netbios access-list host famallowed deny .*
source-bridge ring-group 100
dlsw local-peer peer-id 137.20.1.1
dlsw remote-peer 0 tcp 137.20.5.1 host-netbios-out famallowed
dlsw icanreach mac-address 0020.3539.0ef9 mask ffff.ffff.ffff
dlsw icanreach netbios-name tracy
dlsw icanreach netbios-name jay
dlsw icanreach netbios-name dana
dlsw icanreach netbios-name greg
dlsw icanreach netbios-name todd
dlsw icanreach netbios-name phil
dlsw icanreach netbios-name tony
dlsw icanreach netbios-name scot
r5#sh dlsw rea
DLSw Local MAC address reachability cache list
Mac Addr status Loc. port rif
000a.f0e4.34de FOUND LOCAL TBridge-001 --no rif--
DLSw Remote MAC address reachability cache list
Mac Addr status Loc. peer
0020.3539.0ef9 UNCONFIRM REMOTE 137.20.1.1(2065)
DLSw Local NetBIOS Name reachability cache list
NetBIOS Name status Loc. port rif
DLSw Remote NetBIOS Name reachability cache list
NetBIOS Name status Loc. peer
dana UNCONFIRM REMOTE 137.20.1.1(2065)
greg UNCONFIRM REMOTE 137.20.1.1(2065)
jay UNCONFIRM REMOTE 137.20.1.1(2065)
phil UNCONFIRM REMOTE 137.20.1.1(2065)
scot UNCONFIRM REMOTE 137.20.1.1(2065)
todd UNCONFIRM REMOTE 137.20.1.1(2065)
tony UNCONFIRM REMOTE 137.20.1.1(2065)
tracy UNCONFIRM REMOTE 137.20.1.1(2065)
Suggestions?
Philip G. Virnoche
Sr. Network Engineer - AT&T Wireless
phone: 425.580.5239
cell: 206.601.3134
"HAM AND EGGS - A day's work for a chicken; A lifetime commitment for a
pig."
-----Original Message-----
From: Wayne Gustavus [mailto:wgustavus@mentortech.com]
Sent: Tuesday, May 22, 2001 6:51 AM
To: 'Rick Stephens'; ccielab@groupstudy.com
Subject: RE: OT: 4 weeks and counting
I agree there isn't much time difference between "si" and "sh ip int brief"
if you are a good typist. The potential speed gain is avoiding typing
mistakes. If you are trying to type very fast and have a slight case of the
nerves, you may type "sh ip int bri" and then "sh ipi nt brief", neither of
which will give you the intended result (the first depends on what router
you type it on). It is a whole lot harder to mess up "si".
I used a list of about 10 alias commands that I found to be very helpful,
even though I am a good, quick typist. The trick is to create your list
early and don't get carried away. You need to have the list memorized long
before you get into the exam and be able to type in the list in your
scratchpad to paste into each router without even thinking.
The alias cmds should be second nature by the time your lab date comes up.
For example, in them middle of my exam, the proctor asked me to do a sho ip
route and I entered "sir" without even thinking. If you are only 4 weeks
from your lab and haven't started using alias cmds, you may not want to
start; depends on how much lab time you plan during this time.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:48 GMT-3