From: clingamgunta@xxxxxxxxxxxxx
Date: Tue May 22 2001 - 11:13:21 GMT-3
Bob,
I thought that dlsw bgroup-list 10 comand will transport the traffic from
bridge-groups 2 and 3 to DLSW. Please correct me if I am wrong. Same is the cas
e
with Ring list, dlsw ring-list command should tranport the traffic between the
rings listed in the ring list to dlsw.
Chandra
"chahal" <bob.chahal@ntlworld.com> on 22/05/2001 13:24:00
To: Chandra Lingamgunta@Energis
cc:
Subject: Re: DLSW bridge-group doubts
As you've not posted the complete config you may have this already but....
On Router A you need
dlsw bridge-group 2
also include a staement for bridge-group 3 if you have any interfaces
configured within bridge group 3.
for token ring you need source-bridge ring-roup and as you will have the
ring-group referenced in the token ring interface configuration.
hth
bob
----- Original Message -----
From: <clingamgunta@energis.co.uk>
To: <ccielab@groupstudy.com>
Sent: Tuesday, May 22, 2001 11:32 AM
Subject: DLSW bridge-group doubts
> Hi,
> I was unable to get the DLSW bridge groups working. I have used the
follwoing
> config:
>
> RouterA
>
> dlsw bgroup-list 10 bgroups 2 3
> dlsw local peer-id 1.1.1.1 prom
> dlsw remote-peer 10 tcp 2.2.2.2
>
> int e0
> bridge-group 2
>
>
> Router B
> dlsw local peer-id 2.2.2.2 prom
> dlsw remote-peer 0 tcp 1.1.1.1
> dlsw bridge-group 1
>
> int e0
> bridge0gr 1
>
>
> Above is just the sample config I used. But when I change the RouterA's
config
> similar to RouterB ( removing the bridge-groups), It does work.
>
> Another doubt, when we use ring list should we still have to have
source-bridge
> ring-group in the global config to attach Token rings traffic to DLSW? or
just
> dlsw ring-list command will do this?
>
> Any ideas please?
>
> Chandra
>
>
>
>
>
****************************************************************************
****************************
> This e-mail is from Energis plc, 50 Victoria Embankment, London, EC4Y 0DE,
United
> Kingdom, No: 2630471.
>
> This e-mail is confidential to the addressee and may be privileged. The
views
> expressed are personal and do not necessarily reflect those of Energis. If
you are not
> the intended recipient please notify the sender immediately by calling our
switchboard on
> +44 (0) 20 7206 5555 and do not disclose to another person or use, copy or
forward
> all or any of it in any form.
>
>
****************************************************************************
****************************
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:48 GMT-3